
Your wallet shows a gas fee before every transaction, and the amount changes from hour to hour.
Gas fees explained simply: a gas fee is what you pay the network to process your transaction. "Gas" measures the computing work an action needs. The fee is that work times a price per unit, paid in the chain's own coin (ETH on Ethereum and Base, BNB on BNB Chain, SOL on Solana). Four things decide it:
- How much work the action is (a plain ETH send uses 21,000 gas; a swap or a token launch uses more).
- The base fee, set by how busy the network is.
- The tip you add for faster inclusion.
- Which network you use.
Gas fees explained: how the fee is calculated
ethereum.org's gas and fees page gives the formula: the fee is gas used times the price per unit of gas, and that price is the base fee plus the priority fee (the tip).
Gas fee = gas used × (base fee + priority fee)
Gas prices are quoted in gwei, and 1 gwei is one billionth of an ETH.
A worked example from ethereum.org: a plain ETH send uses 21,000 gas. With a base fee of 10 gwei and a tip of 2 gwei, the fee is 21,000 x 12 gwei = 252,000 gwei, or 0.000252 ETH. The 21,000 counts gas units; the gwei figures are the price of each unit. A token transfer, a swap or a smart contract deploy runs more steps, so it uses more gas at the same price.
The limit and the max fee
Your wallet also sets a limit: the most gas you allow a transaction to use. You pay only for the gas used. If you set a limit of 50,000 for a plain send, it uses 21,000 and the other 29,000 are never charged. The max fee is the most you are willing to pay per unit; if the base fee plus tip ends up lower, you keep the difference.
Your wallet fills in both values, and you rarely need to edit them. This base fee plus tip model came with EIP-1559 in Ethereum's London upgrade on August 5, 2021.
Who receives the gas fee
On Ethereum the base fee is burned, and only the tip goes to the validator who adds your transaction to a block. In the worked example, 0.00021 ETH is burned and 0.000042 ETH goes to the validator. Ethereum has validators instead of miners because it has run on proof of stake since the Merge on September 15, 2022.
Your wallet app does not receive the gas either. MetaMask's help page on why you pay gas when a transaction does not go through says the wallet never gets the fee, so it cannot refund it.
Why gas fees exist and why they go up
Every action runs on shared computers, so each step has a price. That price stops spam and endless loops, and it pays the validators who secure the network.
Fees go up when demand for block space rises, which is called network congestion. Each block has limited room. When many people send transactions at once, the base fee climbs by up to 12.5% per block, and people raise their tips to get ahead. A common trigger is a hyped NFT mint, when many people try to buy at the same moment.
The action itself matters too. Selling a token on a DEX for the first time often needs an approval first, and that approval is its own transaction with its own gas.
Transactions that wait sit in a pool of pending transactions (the mempool) until a validator picks them, and the ones with low tips wait longest.
Which coin pays gas on each chain
Each network charges gas in its own coin, and you need that coin even to send USDT or your own token, to approve or to swap. This is why a wallet can hold tokens and still say "not enough ETH".
| Gas coin | Networks |
|---|---|
| ETH | Ethereum, Base, Arbitrum, Optimism, Unichain, Robinhood Chain, Ink |
| BNB | BNB Chain |
| POL | Polygon |
| AVAX | Avalanche |
| CRO | Cronos |
| HYPE | Elysium |
| USDC | Arc |
| SOL | Solana |
The coin must sit on the same network as the action. ETH on Ethereum does not pay gas on Base; you need ETH on Base. The same token standard can live on many chains (see ERC-20 vs BEP-20), but you always pay gas in the coin of the chain you use.
Keep extra gas coin before a launch. A launch is several transactions, each paid in that network's coin: create the token, approve it, open a pool, airdrop it.
Gas fees on layer 2s, Solana and Bitcoin
Layer 2s: two parts, both small
Layer 2 networks such as Base bundle many transactions and post the data to Ethereum together. Each fee has two parts: an L2 execution fee for running your transaction, and an L1 fee for posting its data to Ethereum. Base's network fee docs say the L1 part is usually the larger one.
That L1 part fell when Ethereum added blobs, a cheaper data space for rollups, in the Dencun upgrade of March 2024.
In my own mainnet runs, opening a first liquidity pool on Ethereum cost under 0.001 ETH in gas, at a quiet price of under 1 gwei. A first pool on Base cost about 0.000033 ETH in gas. They were different pool versions (Uniswap v4 on Ethereum, v3 on Base), so treat the gap as an example only. If you are choosing a chain for a launch, the Base launch guide covers the steps there.
Solana: transaction fees and rent
Solana says "transaction fee", not gas. Solana's fee structure docs set a base fee of 0.000005 SOL per signature, half of it burned. An optional priority fee goes to the validator. The fee is charged even when the transaction does not succeed.
Rent is a separate cost: a new account must hold a minimum balance of SOL. This is a deposit, and it comes back when the account is closed.
Bitcoin: priced by size
Bitcoin's fee depends on how much space the transaction takes in a block, not on computing work. It goes to miners, because Bitcoin still uses proof of work.
How to read gas on a block explorer
Etherscan shows these fields on every Ethereum transaction page, including the pool transaction from my runs:
- Transaction fee: what was paid in total, in ETH.
- Gas used and the limit set: the work done and the ceiling.
- Gas price: the price paid per unit, in gwei.
- Base fee: the network's price for that block.
- Max priority fee: the tip the sender allowed.
- Burnt fees: the base fee part that was destroyed.
Common misconceptions about gas fees
"If it does not go through, I get the gas back." No. Gas used is paid even when a transaction stops partway or runs out of gas. Only the amount you meant to send stays in your wallet.
"A higher limit makes it faster." The limit is a ceiling; the tip buys priority. A limit set too low stops the action partway, and you still pay for the gas used.
"A much lower fee saves money." Setting gas far below the wallet's suggestion usually means the transaction waits in the queue or is not included, and you send it again.
"The Merge made gas cheaper." The Merge changed how Ethereum is secured. Small actions got cheap through layer 2s.
"Gas is the app's fee." Gas goes to the network. An app's own fee, the DEX pool fee, slippage and a token's tax are separate costs on the same trade.
How to pay lower gas fees
| Lever | When it helps | What it does not fix |
|---|---|---|
| Check a gas tracker, then send at a quieter time | Any send that can wait | A launch you must join at a set time |
| Use a layer 2 or a cheaper network | Small, frequent actions | Assets that live only on Ethereum |
| Batch many actions into one transaction | Airdrops, payouts to many wallets | A single send |
| Keep the wallet's suggested tip | Most sends; raise it in advanced settings only when you need speed | A busy network (the base fee still applies) |
Before a send on Ethereum, the Etherscan gas tracker shows the current base fee and typical tips.
Batching saves the most when you send to many wallets. Sending a token to 400 wallets one by one means 400 transactions. A multisender puts up to 400 wallets in one EVM transaction, and the tool charges its own service fee per recipient on top of gas. In my own test, 10 wallets got tokens in one transaction on Base, after one spending-permission signature. The Ethereum airdrop guide walks through it. For a single transfer, a quieter hour or a layer 2 saves more than batching can.
Do it with Tokenry


