
The wrong Raydium pool type can cost you SOL and fees. For a new token, pick CPMM.
A Raydium liquidity pool is a pair of token reserves on Solana that traders swap against, while the people who deposited them earn most of every swap fee. Raydium runs 3 pool types:
- CPMM: full range (x × y = k), fungible LP tokens, Token-2022 support. The default for new tokens.
- CLMM: liquidity inside a price range you set, held as a position NFT, earning fees only while the price is in range.
- AMM v4: the legacy 2021 pool, classic SPL tokens only, no longer recommended for new pools.
How a Raydium liquidity pool works
Raydium is a decentralized exchange (DEX) built on Solana, and each pool is an on-chain program that holds two token reserves. When you swap, you trade against the pool's reserves. Every swap pays a fee, and most of it goes to the liquidity providers.
CPMM and AMM v4 are automated market makers that use the constant product rule, x × y = k. The price is the ratio of the two reserves, so bigger reserves mean a smaller price move per trade. If you know DeFi from the EVM side, CLMM is Raydium's version of Uniswap v3 style concentrated liquidity.
Your two deposits set the opening price. For example, if you deposit 500,000,000 tokens and 10 SOL, the pool opens at 0.00000002 SOL per token (10 ÷ 500,000,000). The pool type then decides how that liquidity is spread, how your fees reach you and what you hold as a receipt: fungible LP tokens on CPMM and AMM v4, a position NFT on CLMM.
CPMM vs CLMM vs AMM v4 at a glance
| CPMM | CLMM | AMM v4 | |
|---|---|---|---|
| Price curve | Constant product | Concentrated in your range | Constant product |
| Liquidity range | Full range | A range you set | Full range |
| Your receipt | Fungible LP tokens | Position NFT | Fungible LP tokens |
| Fee tiers | Several; 0.25% default | Several; main 0.01%, 0.05%, 0.25%, 1% | Fixed 0.25% |
| How fees reach you | Added to the reserves automatically | Collected per position | Added to the reserves automatically |
| Token-2022 | Yes, allowed extensions only | Yes, allowed extensions only | No, classic SPL only |
| Raydium creation fee | Yes | No, rent only | Yes |
| Lock forever and keep fees | Yes | Yes, full range advised | No |
| Effort | Deposit once, nothing to manage | Watch and move the range | Deposit once, nothing to manage |
| Best for | New and meme tokens | Stable and correlated pairs | Older pools that already exist |
Raydium's fee comparison lists the full fee tiers and creation costs for each program.
CPMM: the default pool for a new token
CPMM is a pure constant product pool. Your liquidity covers every price, the pool has no OpenBook dependency, and it accepts Token-2022 tokens with allowed extensions. You deposit once and have no range to manage.
Swap fees stay in the reserves, so each LP token you hold stands for a slightly bigger amount of both reserves over time. There is nothing to claim while you hold the LP tokens; you receive the fees when you withdraw.
Raydium's Burn and Earn lets you lock CPMM liquidity forever and still collect its fees through a fee key NFT. It works on CLMM too, where Raydium advises a full-range position, but not on AMM v4.
The default fee tier is 0.25%, and Raydium suggests 1% for long-tail and meme pairs. Several CPMM pools can exist for the same pair at different tiers.
You can also set a later trading start. Before its open time, a CPMM pool rejects swaps, while deposits and withdrawals work at once, so you can create the pool, check it and then announce a fixed launch time.
CLMM: concentrated liquidity for pairs you manage
CLMM puts your liquidity inside a price range you choose, so each dollar gives more depth near the current price. In exchange, a position earns swap fees only while the price is inside its range.
When the price leaves your range, the position sits entirely in one token: the one that lost value against the other. Where you place the range also decides which token you mostly deposit. For a volatile token, Raydium advises a wider range so the price stays inside longer.
Raydium's own guide estimates that an in-range CLMM position can earn 4 to 40 times the fees per dollar of a CPMM position on the same pair and tier.
CLMM's main fee tiers are 0.01%, 0.05%, 0.25% and 1%. Higher tiers space the allowed price levels further apart (wider tick spacing), which suits more volatile pairs.
Each position is an NFT, and whoever holds the NFT owns the liquidity. Fees build up per position and must be collected.
AMM v4: Raydium's legacy pool
AMM v4 is Raydium's first pool program from 2021, and Raydium no longer recommends it for new pools.
A program upgrade on 2026-07-22 removed its OpenBook dependency, so AMM v4 no longer uses market accounts and works as a plain constant product pool.
Its swap fee is a fixed 0.25%, and it costs more to create than CPMM. Many older pools still run on it, and you can still add liquidity to them or remove it.
Which Raydium pool type should you pick?
| Your situation | Pool | Fee tier | Why |
|---|---|---|---|
| New or meme token paired with SOL | CPMM | 1% (or 0.25%) | Full range, nothing to manage |
| Stable pair, such as USDC/USDT | CLMM | 0.01% | Price barely moves, a tight range works |
| Correlated pair, such as a liquid staking token/SOL | CLMM | 0.05% | Prices move together, use a wider range |
| Volatile major pair you will manage | CLMM | 0.25% | Medium range, moved when needed |
| Token-2022 token | CPMM or CLMM | By pair type | AMM v4 does not accept Token-2022 |
| You want to lock liquidity and keep fees | CPMM, or full-range CLMM | By pair type | Burn and Earn keeps fees flowing |
These picks follow Raydium's fee tier guidance. A higher tier does not always bring more income, because a tier set too high can reduce trading volume. CLMM also pays only if you watch the price and move the range, so if you want to deposit once and leave the pool alone, pick CPMM.
Token-2022 tokens on Raydium
CPMM and CLMM accept these Token-2022 extensions: transfer fee, metadata pointer and token metadata, plus interest-bearing and scaled UI amount.
These are blocked by default: transfer hook, permanent delegate, non-transferable, default account state, mint close authority, confidential transfer and pausable. Raydium rejects pool creation for them unless it has allowed that specific mint. Check your extensions before you mint, using Raydium's Token-2022 support list and our guide to SPL Token vs Token-2022.
A Token-2022 transfer fee is charged on top of the pool's swap fee, so traders pay both.
Swap fees and impermanent loss
CPMM and CLMM send 84% of the swap fee to LPs, 12% to RAY buybacks and 4% to the treasury. AMM v4 sends 88% to LPs and 12% to buybacks. At the 0.25% tier, that is 0.21% of volume for CPMM LPs and 0.22% for AMM v4 LPs.
Impermanent loss is the gap between your pool position and holding both tokens in your wallet, caused by a price move. On a constant product pool it follows this formula, where r is the new price divided by the old price:
Value in pool ÷ value if held = 2 × square root of r ÷ (1 + r)
Worked example: the token price doubles, so r = 2. The result is 2 × 1.414 ÷ 3 = 0.943, so your position is worth 5.72% less than if you had held both tokens. Raydium's numbers for other moves:
- Price up 1.5x: 2.02% loss
- Price up 2x: 5.72% loss
- Price up 3x: 13.40% loss
- Price halves: 5.72% loss
CLMM magnifies impermanent loss. In Raydium's SOL/USDC example with a 120 to 200 range, the position has about 4.4x leverage and loses about 6.5% when SOL reaches the 200 edge, a 1.25x move. At 240 (a 1.5x move) the CLMM loss is 15.8%, against 2.02% on CPMM. Raydium's guide also notes that on a meme/SOL pair, impermanent loss can be bigger than a full year of fee income.
Mistakes to avoid when you open a Raydium pool
- Setting an opening price far from the market: arbitrage bots buy the gap, and the difference comes out of your deposit. The price and first deposit cannot be edited after you confirm. To fix them, you add liquidity at the right price, let arbitrage settle it, or open a new pool.
- Opening a tiny pool: thin liquidity means big price impact for traders. Add enough before you share the pool.
- Bringing too little SOL: the creation fee, rent and priority fee come on top of the SOL side of your deposit.
- Locking a narrow CLMM range: a locked position can never be moved, so whenever the price is outside the range it earns nothing. Raydium calls a tight-range lock almost always a mistake. Lock full range, or use CPMM.
- Burning the receipt when you meant to withdraw: burning LP tokens is permanent and returns nothing to you. The same goes for sending away a CLMM position NFT.
- Creating a duplicate pool at another fee tier: search both mints first so you do not split liquidity across 2 pools.
- Leaving freeze authority live: a mint with a freeze authority can freeze token accounts. Raydium does not block pool creation for it, but advises checking the freeze authority before adding real liquidity. See how to revoke freeze authority on Solana.
- Not sharing the pool ID: a new pool is live on-chain at once but can take a few minutes to appear in Raydium search. Share the pool ID so buyers trade the right pool.
What a Raydium pool costs to open
Raydium's own costs depend on the pool type. These figures come before your deposit and the priority fee, and Raydium's table uses an older rent rate, so its rent figures are approximate. Raydium's figures, checked 2026-11-19:
| Pool type | Raydium creation fee | Rent | Total before deposit |
|---|---|---|---|
| CPMM | 0.15 SOL | about 0.04 SOL | about 0.19 SOL |
| CLMM | none | about 0.061 SOL, plus about 0.072 SOL for each tick array (a block of price levels) your first position covers | about 0.133 SOL with 1 tick array |
| AMM v4 | 0.15 SOL | about 0.15 SOL | about 0.30 SOL |
CLMM tick arrays are never closed, so that part of the rent is not recovered.
To open a CPMM pool with Tokenry's Solana liquidity pool creator, have this SOL ready. The rent here is what this tool's pool setup pays, a little below Raydium's estimate:
| Item | Cost |
|---|---|
| Service fee | 0.1 SOL |
| Raydium creation fee | 0.15 SOL |
| Rent | about 0.03 SOL |
| Priority fee | small network fee |
| Bundle buy (optional) | 0.1 SOL, only if the buys land, plus a Jito tip to the validator |
| Your deposit | your token side and your SOL side |
That is about 0.28 SOL before the priority fee and your deposit.
The other Solana option in the same tool is Meteora DAMM v2, which has no pool creation fee. When I opened one on mainnet, rent was about 0.017 SOL.
What to do next
The pool creator opens a Raydium CPMM pool from your browser. You set the opening price with your two deposits, then launch now or schedule the time trading opens (enforced on-chain). With "Launch now", a bundle buy sends your first buy, or buys from up to 24 wallets, together with the pool creation. You can lock the liquidity forever and still claim its trading fees, and the form tells you which DEX accepts a given Token-2022 token. The tool is non-custodial: you sign every transaction in your own wallet.
After launch:
- Add to an existing pool at its live price: type one side and the other fills in, on Add liquidity.
- Collect CLMM and locked-position fees on Claim pool fees.
- Lock or burn LP tokens with the LP burner.
Do it with Tokenry


